1974 360 M7 PURSANG .. ALL MATCHING ORIGINAL PARTS . SHOW STOPPER !!!!

This is a absolutely beautiful 360 cc Pursang model 121... I just finished it with the exception of not getting a few parts back from the chrome shop ( best in the country for show chrome ) .
I showed it at the Central Oregon ARMA race last weekend .. it drew the crowd in !!!
I can write for a hour about this Bultaco .. keeping it short I will say it was the easiest of bikes I have ever worked on !!
All the nuts and bolts are the original off THIS BIKE !! as well as :
fenders .. original !!! gel coat .. and fender sticker .. I just cleaned the fenders .
the seat cover was OK but with a rip so I put on a new cover and saved the original . even the foam was fantastic !!
The handle bars and grips are new aftermarket ... I saved but did not replate the original one.
the levers and throttle are all the original ones .
new chain and sprockets.
all the nuts and bolts were cad plated as original and not zink. the nuts were yellow cad as original .
The gas tank: Painted with Debur and House of color .. the black strip is not tape !! all paint ! By the way I do all my own work ...
The side covers are the original plastic covers .. They are the original ones that were on this bike when it rolled out of the dealership .
They had numbers on the and some boot scuffing .. I was really torn with re painting or no, .. tuff choice .
Since the bike was so low mileage and super tight I did not split the case, , he piston looked new and with very little to no suet and was as new in tolerances so I left them alone .
The frame also is painted with Debur and house of color clear coat ... all parts bead blasted .
The expansion chamber is also the original one . it had a few dents in the bottom of it some I machined caps for the ends and used high pressure and a torch .. the dents walked out beautifully !! and finished off top show quality !!
the front number plate is after market ..
the kick stand is a original one ... but not the one that came with this bike.
I did replace all the spokes and nipples .. saved most of the original ones and put them away.
the gas petcocks are the original ones !! and work fine .. I do have also some new replacement ones that will go with the bike.
as well as a reproduction set of high end fenders and number plates .
new tires .. Prelli .
number plate screws and rubbers are all the original ones
By the time the auction ends I should have the parts back from the chrome shop. brake stay, ick starte, he original from fender brac, ank hold down washer, nd the vent screws on top of the fork tubes.
The carburetor is like new .. I only needed to hand clean it ?? and the original clamp .. and rubber boot on top of the carb is the original one . the throttle snaps close better they did new.
The rear shocks are not the original ones !!! they are Curnutts .
I will only have a bill of sal, ,, o title !!
If you have any questions please feel free to call me at 971 235-9599 my name is Jaan Ojala
I will also be listing my 74 360 Astro

Also published at eBay.com