Custom Built One of a Kind Reverse Trike Motorcycle Hayabusa 1300

I can be contacted 24/7 with more info about my build. I would be happy to discuses any possibility's about owning my work you just need to ask.

Hello and welcome to my listing I live SLC UT. Any way I’m a master Fabricator, have over 25 years of hands on fabrication experience. The project that I have been working on for the last year is my last “Wow” build! Back in 2002 I built 2 of these units for myself that looked very closely to my current build but I did not build or make any more of these, oth units where powered by the Harley Evo Motors. This unit is running a Hayabusa 1300 180+ Hp motor and I left room up front to fit a Turbo unit if needed? But it does not! My power the weight ratio is more than OUTSTANDING 1000lbs with fuelpowered by a 180hp motor you do the math. The motor is a Suzuki Hayabusa 2003 with 8900 miles. I was personally was about to do a startup company Called “Omega Engineering & Fabrication inc” and I was only going to build and fabricate about 100 units. Each and every unit was to be handmade and each and every one custom one off projects. This Motorcycle without question is a WOW! If you build something like this and it’s not a wow what’s the point! I there are only minor things that need to be do like the following items, 1) install the shifter linkage cable 2) install the braking systems it still needs the master cylinder 3) Install the external fuel pump which I have on hand, ) Add the tac and speedo I don’t have 5) Strip it down for painting. 6) Install the chain 7) Have a back pivot bold made 1” this needs to be machined I just did not get around to having that made a “TEMP UNIT” is in place for now 8) Installing the cooling hoses that I have. OK now the bad I have some unforeseen heath issues that will not allow me to complete this unit so I’m going to sell. I have lot of photos for the DMV to prove I built it from NOTHING. The GRAY plugs or parts you see are “plugs” this is what you need to make a fiberglass mold from. “YEP” I do everything I designed it, cut and welded everything. I have had some unforeseen health issues that will not allow me to complete this RT build. At the listed price I'm giving away my work and this one of a kind Reverse trike I just need to have this sold NOW. 801-330-1765

WHAT YOUR GETTING

Complete rolling chassis as seen in photos current as of 10-29-2015

1) Complete “Plug set” to make the fiberglass molds, his is the main body seen with the fenders TEMP set.

2) A different front noise or body part “Plug”, /p>

3) Left and Right Ram Air intake “Plug”

4) Back Fender “Plug”

5) Pattern to make the lower frame and one lower frame fabed up now

6) Miscellaneous patterns in cardboard for part cut outs

7) Fuel Tank and air cleaner Cover in “Plug”

* Front Spindle to back Axel 111”
*Outside front wheel 62”
*Cockpit side to 24”
*Room for a 6’2” person
*Full racing seat 4 point restraint system
*Front Tires 225-45-17
*Back Tire 205-40ZR-17
*Power 2003 Suzuki Hayabusa 180+ hp
*Fully welded box steel construction
*3 disc brakes
*Projected finish weight 1000Lbs

If you have any questions please ask I can be contacted at 801-330-1765 You can also text me anytime for a faster response. Thank you very much for your time and for looking at my work, /p>

Also published at eBay.com