2008 BD Speed Shop Custom Chopper as seen in Street Chopper Magazine

2007 Custom Built Motorcycles Chopper

Price: US $14,999.00
Item location: Nashua, New Hampshire, United States
Make: Custom Built Motorcycles
Model: Chopper
Type: Chopper
Year: 2007
Mileage: 200
VIN: 1L9PS330771338029
Color: Rasberry / Gunmetal
Engine size: 114
Vehicle Title: Clear
Contact seller: Contact form
Description

This is a completely custom chopper built by the Former BD Speed Shop DBA Laconia Custom Cycles. This bike was featured in Street Chopper magazine. The frame and wheels were built by RC Components in Bowling Green, Y. The engine, how diamond cut 114 Cubic Inch, as made by TP Engineering in CT. The seat is a custom ostrich skin. The bike has a certificate of origian under Laconia Custom Cycles meaning the purchaser of this bike will be the original title holder. It has less than 200 miles on the odometer.
The $14999 price does not include the custom gas tank featured in the magazine.
The bike has been in storage so it will need a good cleaning and the engine will have to be gone through. The front wheel was replaced under warranty for some chrome pitting and will require the proper shimming adjustments by a reputable motorcycle shop. It will be sold as is / as shown.
Only serious inquiries please!
Here is the article from Street Chopper Magazine. You can also go to there sight and search for the original Article!

2007 BD Speed Shop Custom Bike - Never Lost

You Would Never Get Lost Again If You Had GPS In Your Tank, oo!

Rusty Nail, hotography by BD Speed ShopFebruary 24, 009

The story of the bike before you begins like many of your weekends: Just some friends sharing time at a show talking about what might be and what could have been. For the crew at BD Speed Shop, heir short-term goal was to bring their already show-stopping bike that cluttered their office with trophies to the next level. Walking the rows of bikes, hey took notes on what was grabbing their eye and what hadn't been done. Their observations led to the idea of a full audio/visual system in the tank on their show stopper.

When they got back to their shop early Monday morning, he ideas of how to make it work rolled off their tongues and onto paper. The shop's previous heartbreak-they lost a pop-up cap on a tank from a past build at the paint shop-became a blessing in disguise. They could cut up a perfectly good fuel tank and not feel the slightest bit guilty about it-it was damaged goods, fter all! The excitement that the friends felt about the journey they were about to embark on was short-lived after remembering that the next show they had to be at was just two weeks away. Could it be done?

ADVERTISING

Over the next two weeks, he spare fuel tank was cut apart and reworked to contain small compartments for all the components. Boxes were fitted for the waterproof speakers, rills were water jet cut, nd bezels of aluminum were made to cover all the compartments. The BD crew spared no expense, uying the smallest electronics possible to get everything to fit without using up all the space for fuel capacity. With little space left, he crew figured, hy stop here? They decided to go all the way, nd the GPS system was added to the already hectic assembly of electronics in the tank. How they were able to fit that many components into this tank is a magic a trick Houdini would be proud of.

The BD crew was burning the midnight oil. Every waking moment was spent completing the tank before the two week deadline. As the time grew close, o did the completion of the tank; after buttoning up the fabrication and electrical, he only unknown was paint and airbrushing. With a lot of help from The Little Hog Shop and some magic, he sweet candy raspberry and charcoal paint was laid on the tank and details finished just two days before the their deadline. The tank was done.

The tank fit perfectly on the matching raspberry powdercoated RC Components frame with a 6-inch stretch and 40-degree neck. Shoehorned between the backbone and the single downtube is an eye-catching polished TP Engineering 114ci powerplant. Holding up the chassis is a set of Mid-USA Big Uns forks and triple trees with a Progressive air tail making the ride as smooth as the lines on the bike. BD Speed Shop continued in their fabrication of front and rear fenders, iving the bike a little attitude. The aggressive bar raising style of the boys at BD Speed Shop is also seen in the wheel and tire combo that they picked for this project. The RC Components Gladiator 21-inch front was dressed with Avon rubber, nd an impressive 330 Avon was stretched on the rim out back.

Once at the show, D had some stiff competition with well over 300 bikes with many strong-looking customs to compete against. At the end of the day, fter the stories had been told and the new ideas exchanged with friends, t was announced that the crew at BD Speed Shop had done it again as they were called up to accept the Best Of Show award. A little more room will have to be made in the office next to all the other trophies they've won in the past for all of the new ones they are going to pick up with their freshly modified chop.

MAKE/YEAR:

'07 BD SPEED SHOP

FABRICATION:

BD SPEED SHOP

ASSEMBLY:

BD SPEED SHOP

BUILD TIME:

EIGHT WEEKS

ENGINE

SIZE/TYPE:

114CI/TP

ENGINEERING EVOLUTION

CASES:

TP ENGINEERING

FLYWHEELS:

TP ENGINEERING

RODS:

TP ENGINEERING

PISTONS:

TP ENGINEERING

CYLINDERS:

TP/DIAMOND CUT

HEADS:

TP ENGINEERING

CAM:

TP ENGINEERING

CARB:

PATRICK RACING DUAL

MIKUNI CARBS

IGNITION:

TP ENGINEERING

PIPES:

STAINLESS CREATIONS

TRANSMISSION

YEAR/TYPE:

'07/JIMS SIX-SPEED

CASE:

JIMS

GEARS:

JIMS

CLUTCH:

BDL

PRIMARY DRIVE:

BDL TOP FUEL WITH

OUTER BEARING SUPPORT

FRAME/SUSPENSION

YEAR/TYPE:

'06/RC COMPONENTS

RAKE:

40 DEGREES

STRETCH:

6-INCHES

SWINGARM:

RC COMPONENTS PHANTOM

REAR SUSPENSION:

PROGRESSIVE AIR TAIL

FORKS:

MID-USA BIG UNS

TRIPLE TREES:

MID-USA BIG UNS

WHEELS, IRES, ND BRAKES

WHEELS

FRONT:

21X2.5 RC COMPONENTS GLADIATOR

REAR:

17X12 RC COMPONENTS GLADIATOR

TIRES:

FRONT:

{{{90}}}/90/21 AVON VENOM

REAR:

330 AVON VENOM

BRAKES:

FRONT:

RC COMPONENTS

REAR:

RC COMPONENTS

FINISH

MOLDING:

MOE @ THE LITTLE HOG SHOP

PAINTER:

MOE @ THE LITTLE HOG SHOP

COLOR:

RASPBERRY CANDY WITH

HIGH METALLIC CHARCOAL

GRAY

GRAPHICS:

JOE

CHROME PLATING AND POLISHING:

CHROMEMASTER

POWDERCOATING:

POWDERCOATING ALTERNATIVES

ACCESSORIES

BARS:

CUSTOM CYCLE CONTROLS

RISERS:

N/A

HAND CONTROLS:

CUSTOM CYCLE CONTROLS

HEADLIGHT:

HEADWINDS

TAILLIGHT:

RC COMPONENTS

GAUGES:

DAKOTA DIGITAL

ELECTRICAL:

HUNDERHEART MICRO HARNESS

FUEL TANK(S):

BD SPEED SHOP ONE OFF

DASH:

N/A

OIL TANK:

BD SPEED SHOP

FRONT FENDER:

BD SPEED SHOP

REAR FENDER:

BD SPEED SHOP

FENDER STRUTS:

N/A

PEGS:

SUPREME LEGENDS

FOOT CONTROLS:

SUPREME LEGENDS

SEAT:

AMERICAN AUTO SEAT COVER

Also published at eBay.com