ELECTRIC NINJA CONVERSION WITH LITHIUM BATTERIES AND 19+HP MOTOR 300 AMP CONTROL

 This is custom prototype designed and built by myself. This is a 1998 EX250 NINJA FRAME with a custom battery cage. CNC motor mount. and custom fairings. It has an Alltrax AXE controller 300 amp. an Elcon PFC 1500 onboard charger which charges at 110 with a standard house plug and 220 with an additional plug not included. It will charge in 1. 5 to 2 hours. It has VALENCE TECHNOLOGIES UCHARGE XP U1-12XP BATTERIES 40AH. 6 for the 72 volt pack and one for the lights. It has an integrated BMS battery management system that balances each battery together int the pack with the BMS controller under the seat. There are all LED lights. headlight. brake light. and turn signals. The motor is a MARS ME709 19 +HP motor with dual brushes. The bike goes 55mph and 25-30 mile range. It is great for in town and very fun single speed bike to ride! OVER $6000 INVESTED!!!In the last picture-. which was taken before the bike was finished). the battery cage is actually mounted to the original engine mounts on the top of the frame and connects to the CNC motor mount. The CNC motor mount connects to the engine frame bolt mounts attach with hardened bolts and lock-nuts. The design is rigid and the bike weighs 375lbs. a stock weight of the original 1998 EX250 Ninja. The weight distribution is pretty close to 50-50 from front to rear. I put progressive springs in the front forks as well. Thanks!

Also published at eBay.com