1995 Ducati Monster M900. Fun Naked Cafe Racer

What you have before you is a Custom 1995 Ducati Monster M900 Bike. This Monster was disassembled and Professionally built from the ground up to now stand in front of you as a work of Art. This Bike has Taken Trophy due to its looks and style in catogories "Best Italian Bike" and "Best Custom". Mileage on the Moster is currently a little over 2000 Miles since Build (32K) Before Restoration and will increase due to use. Bike is currently registered and has a clean title in my name.
Here is some of the History on the Build
Frame, heels and Suspension...
1. Frame, wing Arm and Suspension Arch was removed from bike, andblasted and Professionally Powder coated Gloss Black.
2. All Fasteners replaced with A2-70 Stainless Fasteners to Reduce Weight.
3. Cleaned and Serviced Olines Rear Shock Assembly
4. New Steering Stem Bearings.
5. Front Bridgestone Battleax Hypersport HP (120/17ZR-17) and Rear (180/55ZR-17)Tires
6. New Front and Rear Wheel Bearings
7. Aluminum Anodized Gold Angled Wheel Tire Stems
8. New Vortex Aluminum Rear Sprocket (43T)
9. New 520 O-Ring Chain
10. New CNC Fabricated Chain Case Saver.
11 Handlebar Risers for Better Riding Position
12.New Handlebars
Engine...
1. Disassembled down to the bare Aluminum Block Halves
2. Cleaned, esealed and Assembled using the Following:
3. All Fasteners replaced with A2-70 Stainless Fasteners to Reduce Weight.
4. New Cylinder Head Studs and Cylinder Head Stud Nuts. Block Machined to Accept New Oversized Studs (Timeserts Installed)
5. New 92mm 11:5 to 1 Aluminum Forged CNC machined High-Compression Piston Kit.
6. New Piston Rings, ins, nd Clips.
7. Nikasil Cylinders Bores Prepped for Assembly.
8. New Athena Engine Gaskets and Genuine Ducati Bond on all Mating Surfaces.
9. Stainless Steel Intake and Exhaust Valves Lapped, eated, himmed and all Ports Cleaned.
10.Custom Fabricated Oil Cooler and Oil Cooler Lines with High Pressure Braided Hose.
11.All Fittings Replaced with New Lightweight with Aluminum Anodized Fittings.
12.Liquid Filled Oil Pressure Guage.
13.Liquid Filled Oil Temp Gauge.
14.CNC Fabricated Chain Guard Case Saver.
15.Ducati Exact Fit Timing Belts
16.K&N Oil Filter.
17.K&N Crankcase Breather.
18.All Misc Hardware and Parts are Genuine Ducati Brand.
Clutch...
1. Ducati 6 Speed Dry Clutch
2. Barnett Clutch Plates.
3. Barnett Race Clutch Springs.
4. Vented Clutch Cover
5. Vitron O-Ring for Control Push Rod.
6. Speigler Clutch Line Kit.
7. Ducati Clutch Reservoir Caps.
8. Low Effort Clutch Slave Cylinder
Carburetor and Fuel Delivery System...
1. Stage 3 Titanium Jet Kit Installed.
2. New Emulsion Tubes and needle Jets.
3. K&N Pod Air Filters.
4. Positive Flow Low PSI Electric Fuel Pump.
5. Inline Fuel Filter.
6. Braided Fuel Lines.
7. Fuel System Balanced for Peak Performance.
8. Fuel Tank Has been Sealed With "Dragons Blood" to Perserve Original Ducati Tank.
9. SSR CNC Fuel Cap
Electrical System and Ignition...
1. Entire Wire Harness and Connectors Cleaned and Inspected.
2. Entire Electrical System and Charging system Checked and Operating Correctly.
3. New Lightweight Corse Dynamics Battery Box.
4. New Heavy Duty Battery Cable Kit.
5. New Light Weight Gel Supersmart Battery (240 CA).
6. New Starter
7. High output Coil Packs
8. New Ignition Pickups
9. NGK Spark Plugs
10.Koso GP Style RX2n Instrument Cluster
11.Koso Digital Volt Meter
Body...
1. Ducati Performance Alloy Under Engine Nose Chin
2. Custom Carbon Fiber Weave Seat.
3. Solo Seat Cover
4. Carbon Fiber Side Covers
4. Ducati Performance Aluminum Rearsets (Rare item)
5. Custom Front Tail Lights
6. Intergrated Led Tail Light, rake and Turn Signal Assembly
Brakes...
1. New Speigler Braided Front and Read Brake Lines.
2. New Banjo Crush Washers Installed at all Attachment Points.
3. Front- Ferodo Double-H Sintered Brake Pads.
4. Rear- Ferodo Double-H Sintered Brake Pad.
5. Ducati Brake Reservoir Cap.
6. Rear Brake Banjo Style Brake Light Switch.
Exhaust...
1. New Stainless Header Assembly
2. Carbon Fiber Wrapped Glass Packed Slip ons.
3. All new Stainless Hardware and Mounting clamps
Shipping will be the responsibility of the auction winner.
Motorcycle must be "Paid in Full" before it will be released to auction winner
Feel Free to ask any questions
GOOD LUCK

Also published at eBay.com