Harley-Davidson Police Road King, 2013, Vivid Black, 12,500 miles

Harley-Davidson Police Road King 2013 Vivid Black 12500 miles.

VIN: 1HD1FHM1XDB660057

I bought this bike brand new in September 2013. I did the following modifications and enhancements:

- I changed the Police Saddlebags to the OEM Harley-Davidson Touring Saddlebags with OEM HD liners (removable bags).

- The rigid Rour-Pak mount was modified by a Custom Shop so the detachable passenger backrestcan be easily installed and removed and then the Tour-Pak can be installed.

- A Harley-Davidson Touring Bag P/N 93300004 that securely installs on the rigid Rour-Pak mount

- A Burly Easy Boy Light Clutch was installed by the HD dealership that made the clutch very comfortable to operate.

- The catalytic converter was removed – Wild Pigs head pipes with professionally removed catalytic converter were installed which significantly reduced the engine heat and made the sound so much better. I still have the OEM head pipes if you need them.

- I upgraded the OEM Rear Shocks and front fork springs to the Progressive 444 Series Rear Shocks and Progressive Front Fork Springs Kit which made the ride very comfortable and stable.

- I installed LePera Maverick Daddy Long Legs p/n LK-957DL very comfortable.

- Klock Werks Flare 16” windshield

- Harley-Davidson Auxiliary Lighting Bracket Kit P/N: 69227-04A Chrome

- Harley-Davidson Bullet Rear Turn Signal Light Bar Kit P/N:68617-04 Chrome

- Handlebar Outlet with Gadget Mount p/n PKT-090-60-X Chrome with RAM Ball.

It’s permanently connected to the battery very convenient for the GPS or heated gear.

- For the additional comfort I installed:

1. Kuryakyn Extended Brake Pedals: The answer to more leg room on floorboard equipped H-D Models! Levers move the location of the brake pedal pad forward and down while flattening the angle of the pad. Now your foot is no longer “under” the brake pedal resulting in easier and more natural braking. All levers are beautifully polished and chrome-plated steel. They have a bronze bushing with a grease fitting for smooth operation and long life.

2. Kuryakyn Extended Girder Shift Lever: This chrome beauty will give you a lot of additional room on the floorboard. With an 8” length it’s about 1-3/4” longer than a stock Touring or FLST shift lever. Works as both front or rear on floorboard equipped Harleys. The perfect complement to our Extended Girder Brake Pedal.

3. Kuryakyn Floorboard Relocation Brackets for Driver Boards: Repositions driver boards out 1" and forward 1" from stock location. Makes a noticeable difference in comfort; thighs aren't as tight against the tank right knee is not as tight against the air cleaner and legs get to stretch out a little bit more.

4. Harley-Davidson Extended Reach Rider Footboard Pans Traditional Shape Part Number 50409-04. This kit extends the rider footboard forward of the stock location by one inch providing the tall rider a comfortable riding position. Traditional Shape design.

The bike has always been stored in the garage was serviced in the Harley-Davidson dealership.

5. The rear tire was changed at 10000 service the front tire was changed 200 miles ago.

6. The bike has the transferable HD warranty which covers all mechanical issues plus a road hazard issues like damaged tires and rims. This warranty is good until 2018.

The bike is in PA (near 18435) now but I can bring it to NY Queens for a pick up.

Also published at eBay.com