harley davidson sportster 1200 brat style bobber flat tracker chopper custom

This is a 1993 sportster with a fresh 1200 top end including new valve seals and piston rings. Bike has approximately 50 miles since rebuild(no speedo ordo) The cam cover has been trimmed on the bottom to expose the oil pump and add a custom look. The transmission sprocket cover has also been cut down to expose the sprocket both have been powdercoated glossy black along with the push rod tubes rocker boxes and primary cover. The carb has been cleaned out with new gaskets and diaphragm. Brand new air cleaner (also all components powdercoated). New throttle cable throttle housing and sleeve as well as all new rubber oil lines clutch cable and brake lines. Hand made "window" style handlebars "which are the widest part of the bike at 27" also powdercoated gloss black. New risers and polyurethane bushings as well. New neck bearings and races as well as wheel seals. The front end has all new bushings as seals also. Custom headlight mount to hold the Hella off-road headlight. Lower legs have the fender mounts shaved off and also powdercoated as well as the triple trees. New Firestone tire on front(19") as well as the rear(16"). New chain and 20 front sprocket and a 48 rear sprocket. Rear lowering kit as well as progressive 11" shocks. New dynatek performance 2000i ignition and spark plug wires. New battery. Old model a ford taillight that's been cleaned up and mounted to a license plate frame. Bobbed rear fender louvered battery cover and a custom made solo seat pan covered in diamond tuck by Haifley Brothers. The alien single cap gas tank has been frisco'd with a 3 point mount instead of two points a new petcock and vented gas cap the gas tank is also powdercoated. The rear frame rails have been bobbed and had custom round ends made in a lathe welded and smoothed out before powdercoat on that as well as all the motor mounts. Pretty much every part of this bike that was dirty broken or ugly has been torn off replaced and cleaned up with a cool new look. New gaskets and seals on the entire motor. Custom made tig welded exhaust pipes also smoothed out before covering with heat wrap. Almost every bolt has been painted black and this bike looks clean and tough. For any addition pictures or questions please contact me. video of bike running on youtube will be uploaded shortly search sportster 1200 brat style bobber user name fastbackadam or try this linkhttp://youtu.be/JdQdtu2IGGsbuyer pays all shipping costs but i will help load the bike onto transport.thank you for looking!

Also published at eBay.com