Service Honda CR500AF CR500 Low Hours True Works Bike! Built for Tall Riders
2007 Honda CR
Price: | US $7,500.00 |
Item location: | Robins, Iowa, United States |
Make: | Honda |
Model: | CR |
SubModel: | 500AF |
Year: | 2007 |
Mileage: | 67hours |
Engine size: | 500 |
Vehicle Title: | Clear |
Contact seller: | Contact form |
Here's the real deal boys! Service Honda CR500AF, hat I had A.J. at Service Honda personally build for me in 2007. He's the Guru behind this legendary bike and has built over 2,000 of them.
Enjoythe picsof this Awesome works bike... and or read all the details below.
I turned 40 in 2007 and being a 2 stroke big bore freaktreated myself to the Ultimate bike for my 6'3" tall frame. No expense was spared. I went "All In" and "All Out" on this bike. See list of new parts below, nd works Suspension!
Very low 67 hours. Iinstalled the hour meter on the bike3 days after A.J. delivered the bike to me. I've always had a garage full of bikes to ride and spread my limited riding time between numerous bikes. I put 300 hours on my 1997 CR500 I rode back in my hay day for 5 years and NEVER replaced the piston/rings!
It's the ultimate do it all bike! My CR500AF rides were groomed track days, nd fast trail loops where I can roost my buddies and wheelie from turn to turn. Slow or tight trails are no problem for this 2 stroke big bore. It idles perfectly, ever overheats, arely stalls, nd gets with it on the open straights. It's just as comfortable on MX tracks being lightweight, owerful and best of allhas Factory Connection "Works" suspension.
The build: I had a choice of several frames, ut A.J. strongly recommended a 2003 CR250 frame as it has the longest seat to foot peg height suitable for tall riders, nd at the time it was his favorite frame for the ergos. He had two 2003 frames left, nd he was keeping the last one forhimself. :-) Paired with tall bars and a tall seat... This is the most comfortable bike I've ever ridden for my tall frame. Suspension is 2006 CRF450 forks/shock. Valved/sprung for a 225 lb.rider, his bike is made for big guys...Yet anyone who has ridden it from 170 to 250 lbs says it feels amazinglyplush without being saggy or soft. I had Factory Connection do everything possible to the forks except the $800 anti friction coating. They added anti bottom collars etc... Total with freight was $1,100 for fork and shock mods! It's the best mod I've ever made to any of my bikes and worth every penny. This CR500AF bike can be ridden longer and harder because the suspension is that good.
So in September of 2007 A.J. met me half way to deliver my bike. See pics below. It was a stock CR500AF. Zero hours. Hand built motor. Pro Circuit pipe/silencer.
Customization list:
There are other upgrades, ut you get the point. This bike is LOADED. Many OEM stock parts will come with the bike.
EXCELLENT CONDITION. Everything is tight on the bike. No excess play in linkage. Greased / serviced top to bottom several times. No leaks, tripped bolts, orn parts. Compression at 67 hours is EXACTLY same as the day I brought it home. It tested 150 psi in 2007 and it still reads 150 psi. Bike starts on 1-2 kicks every time. Idles fine. Revs out perfect. No clutch creep. Clutch basket has little to no grooves etc.
Frequent tranny oil changes with Pro Honda gear lube. Air filter cleaned every 4-5 rides. I have several air filters for the bike.
I'm selling as I rarely ride anymore. I've sold off my 7 other dirt bikes saving the best for last...
I don't have to sell it. But I'm more into fishing than riding now a days. I revamped the mighty 500 to my liking in hopes to spur my interest in riding more... but decided to offer it up for sale.
New CR500AF's are $13,500 from Service Honda! Check out their web page. Also check outtheir customization list. $$ EXPENSIVE BIKES.If you don't have the suspension revalved immediately, hey are truly un ridable as they are sprung way to soft and the bike bottoms and G's out at medium speeds. So there goes another $1,000 bucks. Bars, hain/sprocket etc... all need to be updated as well.
Title and current registration in hand. If your local, essage me and come see it... I may even let you ride it IF your a SERIOUS buyer. :-)
I am self employed, ork from home thus have a flexible schedule. I WILL help with delivery at my discretion for just the price of gas up to 500 miles. I WILL build a pallet for the bike for $50and drop off at the nearest freight terminal for $50, nce full payment has been received. I've shipped bikes several times before as I've been selling on Ebay for 15 years. :-) 100% positive in feedback. I'm a straight shooter, onest, nd easy going.
What are you waiting for... Buy this TRUE WORKS Bike today.
Also published at eBay.com