2010 HONDA VT1300 CR STATELINE 7K V TWIN VTX FURY STAR BOULEVARD VULCAN CRUISER

2010 Honda VTX

Price: US $3,700.00
Item location: Henderson, Nevada, United States
Make: Honda
Model: VTX
Type: Cruiser
Year: 2010
Mileage: 7,945
VIN: JH2SC660XAK000093
Color: Black
Engine size: 1,300
Vehicle Title: Rebuilt, Rebuildable & Reconstructed
Contact seller: Contact form
Description

This S T A T E L I N E 1300 islocated in las vegas NV.....
WE HAVE HAD 100% FEEDBACK FOR 10 YEARS!!! BID WITH CONFIDENCE !!!
PRICE WAS $11700 NEW- BUY IT NOW FOR JUST $3900
* * * MECHANICAL DETAILS * * *
RUNS GREAT . ONLY 7945 CORREC, CTUAL MILES .
ATTN CALIFORNIA BUYERS - YOU CAN BUY THIS AND REGISTER IN CALIF AS IT HAS OVER THE NEEDED 7500 MI !!!
LOOKS GOOD AS IS OR CUSTOMIZE OR BUILD A FULL BLOWN STRETCHED BIKE - AS HONDA HAS DONE THE STRETCH ! WOW
EASY FIX - - - DROPPED ON LEFT SIDE . BIKE DID NOT HIT ANYTHIN, NO FRONT END IMPACT.ALL LIGHTS WORK - READY FOR INSPECTION . NEW BATTERY .DENT TANK & FEW SCUFFS- EASY GLOSS BLACK REPAINT AS BLACK IS LEAST EXPENSIVE PAINT AND NO MATCHINGAND LOW COST PROFESSIONAL REPAINT /REMOVE TANK AND HAVE BODY SHOP REPAINT
DAMAGE TO GAS TANK BUT NO IMPACT DAMAGE TO FRONT WHEEL OR FORK
ENGIN, LUTCH AND TRANSMISSION OPERATE PERFECTLY . RUNS GREATTHROTTLE RESPONSE IS PERFECT AND FUEL INJECTED !!!
BRAND NEW BATTERY
NO LEAKS OF ANY FLUID . NO RADIATOR DAMAGE . FLUIDS ALL FULL AND CLEAN .
SEE PHOTOS FOR CLOSE INSPECTION .
NEEDS LEFT FOOTPEG RUBBER , EFT REAR SIGNAL SCUFFE, EFT MIRROR
HAS SEAT TEA, ENT IN TANK - HAVE REPAINTE, ITTLE SCUFF ON EDGE FRONT FENDE,
PIPES HAVE NO DAMAGE - GREA, EEP SOUND FOR A STOCK SYSTEM AND LOOKS LIKE CUSTOM PIPES
HANDLEBARS ARE NICE N WIDE / BARS APPEAR STRAIGHT AS DOES COMPLETE FRONT END
FORK SEALS ARE DRY . TIRES HAVE DESCENT RUBBER .
I PERSONALLY HAVE RIDDEN THIS BIKE .I INSPECTED IT BEFORE PURCHASE FROM INSURANCE COMPAN, nbsp;PURCHASED I, PERFORMED ALL MECHANICAL WOR, WROTE THIS DESCRIPTION AND TOOK THE PHOTOGRAPHS .
MAGAZINE REVIEWS ON THIS BIKE
Known as the VT1300 models, he new bikes are powered by the same 1312cc, iquid-cooled, OHC, -valve-per-cylinder, ingle-pin crank, 2-degree V-Twin the VTX models employed. But instead of inhaling air-fuel mix through CV-style carbs, he VTs benefit from EFI utilizing 38mm throttle bodies.
Power gets to the back wheel via a 5-speed gearbox and shaft final drive, ust as it did on the VTX models.
Honda frames the Sabre as the “pro-street” model in the VT1300 line.
Honda has given the VT1300 bikes the general classification of Custom Cruiser in the company’s lineup, ut they also each have distinct model names: Sabre, tateline and Interstate.
Eagle-eyed Honda enthusiasts will know that Sabre (V45, 65 and a Shadow cruiser) and Interstate (Gold Wing and Silver Wing) are familiar names in the Honda motorcycle family. Stick with what ya know, e guess…
The three fresh-faced VT1300 machines join the Fury – the first of the new VT1300 steeds – as the next generation of Honda’s popular 1300cc cruiser platform. For now we’ll go over the Sabre, ith the Stateline and Interstate reviewed at a later date.
Following the Fury’s lead
From April ’09 – when the Fury was unleashed on the buying public – to February of this year, onda says the mass-produced chopper has been the best selling metric custom cruiser in America. Unfortunately Honda didn’t give out Fury-specific sales figures (surprise!), ut we’ve no reason to suspect the Japanese bike-making giant is fibbing.
With such a successful product as the Fury, t makes sense that Honda would incorporate a model into the new VT1300 line that’s similarly designed.
While the Sabre’s style is reminiscent of its Fury brother; it has a look unique in the VT family. Note the shaft portion looks more like a traditional swingarm and less like a shafty.
While the Sabre, ike the Fury, uns a 21-inch wheel (90/90-21 tire) up front, he Sabre’s 33.0-degree rake is milder than the Fury’s chopper-ish 38.0 degrees. Honda has pegged the Sabre as the “pro street” model. It has an element of long and low but also tends toward a more muscular stance than does the Fury.
And although much is shared amongst all the VT models (some things also carry over from the VTXs), here are a number of key distinctions between the Fury and Sabre:
Comparing the Fury and Sabre
Front Suspension
Fury: 45mm fork with 4.0” travel Sabre: 41mm fork with 4.0” travel
Rear Suspension
Fury: single shock w/rebound damping and 5-position preload; 3.7” travel Sabre: single shock w/threaded-collar spring preload adjuster; 3.9” travel
Rear Tire
Fury: 200/20 x 18 Sabre: 170/80 x 15
Wheelbase, ake, rail
Fury: 71.2”, 8.0 degrees, .5” Sabre: 70.0”, 3.0 degrees, .6”
Seat Height
Fury: 26.7” Sabre: 26.9”
Fuel Capacity
Fury: 3.4 gal Sabre: 4.4 gal
Curb Weight
Fury: 663 lbs Sabre: 664 lbs (679 lbs w/ABS)
A couple more subtle differences ‘tween the Fury and the other VT models: The Fury’s downtube is straight, hile on the others the frame downtube is curved inward slightly; and the Fury’s swingarm is aluminum rather than steel.
Homogeny is found in the brake department. All VT models, ncluding the Fury, un the same setup carried over from the VTX models: a single 336mm rotor gets squeezed by a dual-piston sliding-pin caliper up front, hile out back a single-piston sliding-pin caliper grabs a 296mm disc.
The smartly placed speedo is fairly easy to take in at a glance. We’re pleased with the Sabre’s overall styling, ut the switchgear could use a more contemporary look.
Eye of the beholder
Styling is almost entirely subjective, owever, think it’s worth pointing out that I found the Sabre far more attractive in the flesh than I did when only gazing at images of the thing. It’s difficult to appreciate the aggressive “curvature” of the fuel tank from photos, ut when viewed up close and personal, ts clean, ustom-bike-like lines are noticeable.
Also nicely penned is the shaft drive housing. Honda did an excellent job of integrating/shaping it to look more like a traditional swingarm rather than a big, onking shafty. And the aftermarket-looking (and sounding!) dual exhaust virtually eliminates from view the less attractive right side of the swingarm.
Overall the Sabre has smooth, lowing lines, nd the uncluttered area between the front cylinder head and frame headstock junction lends to that custom bike look – lessons learned from the Fury.
Another nice touch is the speedo’s placement as far forward as possible on the tank. Whether by design or just good luck, his location makes quick views of the instrument panel much easier than if it were placed further down the tank.
Switchgear is big, imple and easy to operate. But a more contemporary, pdated look or shape for the switches would better tie in the bike’s general style, hile also exemplifying the attention to detail for which Honda is known.
All that glitters … ain’t metal?
The 1312cc engine is well suited to the bike’s intentions. However, ome of Honda’s intentions for the engine might be perceived either as good or good for nothing, epending on the bike enthusiast you ask.
Honda chose to use chromed plastic covers in various places on the VT1300 engine, nd the fender is plastic, oo; a decision Honda says its customers were okay with – at least by their indifference if not outright asking for the plastic treatment. The thing sure looks like a gem, hough!
A sizeable share of the VT engine is covered in plastic. From nearly all the engine case covers to the air cleaner cover to the cylinder heads, igh-luster chrome plastic fa?ades spiff up the Twin. Even the headlight nacelle and front fender get in on the non-metal act. Along with cost savings associated with utilizing chromed covers and other non-chromed plastic in lieu of metal, onda says the chrome should be just as durable as the chrome on metal.
Although time constraints prevented us from polling Honda dealerships for hard figures, ur collective experience also tells us that replacement costs for plastic OE parts will likely be less than for identical parts made of metal.
All this plasticing up, ays Honda’s Jon Seidel, as given the go-ahead, o-to-speak, y potential VT1300 customers queried in focus group studies. Study participants didn’t necessarily request the plastic treatment, ut according to Seidel they didn’t find using the plastic bits particularly offensive either.
This is an interesting contrast to Star Motorcycles’ philosophy of purposely using metal on its bikes in places that plastic would make a suitable substitution; like a fender for example. Star believes using metal instead of plastic adds value to its products.
Saddlin’ up to the Sabre
During his time aboard the Fury, ntrepid reporter Kevin remarked on the 52-degree Twin’s “rumbling lope” and spot-on fuel injection.
Some vibes and shudders are requisite of the V-Twin experience, ut as Kevin duly noted, ual-counterbalancers nicely offset the shake, attle and roll of this single-pin crank Twin, itigating vibes to a tolerable level without entirely eliminating the feel of a Vee. He also commented on the issue of bumping his right knee against the Fury’s air-cleaner cover; I had a similar experience on the Sabre.
The Sabre is an able handler, nd reasonably comfortable, oo.
Kevin also appreciated the “appropriately butch note” from the Fury’s 2-into-1-into-2 exhaust. Since the Sabre and Fury mills are identical, he Sabre’s exhaust is equally burly sounding, o the point that I wondered if it flies just under the noise emissions radar. I rather liked the sound and was impressed by the amount of aural attitude still available in a bike manufactured in today’s seemingly over-regulated emissions environment.
Ergonomically the Sabre is reasonably comfortable on jaunts covering at least 50 miles at a time. It might remain cozy for longer stints, ut this was roughly the distance between stops during our ride.
The forward controls, nd narrow, rag-style bar didn’t put my 5-foot 8-inch frame in an unbearable stretch. However, was positioned such that my backside got a skosh numb, ccasionally requiring me to adjust to get the blood flowing again. A fellow rider – taller than I am – had similar comments about a numb bum.
This pelvis-rotated-forward/riding-on-the-tailbone position isn’t atypical for a custom-style cruiser, o the Sabre’s comfort was, t worst, etter than average.
Adjustable-reach clutch and brake levers add a bit of rider fit fine-tuning. Also, or my tastes, ’d prefer a wider handlebar with a degree of “pull back” for a more relaxed position and increased steering leverage, ut the existing bar works well enough.
For an OE exhaust system, t both looks and sounds like aftermarket.
Overall ride quality from the suspension was on the firm side – again, ot unusual in this segment. However, he Sabre’s ride comfort was borderline plush in contrast to a number of other custom and custom-like bikes I’ve sampled.
Despite a long wheelbase, azy rake and spindly 21-inch front wheel, he Sabre steered without much effort, idn’t have that front-end “floop” when initiating a low-speed maneuver and was surefooted mid-corner. Not all “customs” can boast of such good handling.
Seems most cruiser manufacturers bias a strong rear brake over a potent, r at least functional, ront brake. Not so on the Sabre.
Its wispy-looking single rotor/caliper up front appeared suspect, ut in fact it halted the bike authoritatively with moderate effort – say two to three fingers – at the lever, nd provided decent feel. Feel from the rear brake, owever, as hedging numb, nd stopping power was at best sufficient.
Sabre summary
Many customers – not just the Gen Xers and Yers specifically targeted by Honda for the VT models – shopping in this corner of the cruiser market should find plenty to appreciate about the Sabre’s uncomplicated but assertive style, ase-of-use and what we expect will be classic Honda reliability and refinement.
Comin’ at ya: the 2010 Honda VT1300 Sabre!
An MSRP of $11,799 is where the Sabre’s price tag starts, hile the option of ABS adds $1000. The bike comes in either Black or Candy Red, nd should be in dealers now.
= = = = = = = = = = = =

One year ago, onda knocked ‘em dead with theVT1300 Fury, shaft-drive, iquid-cooled, uel-injected 1312cc V-Twin that went as far as a production custom cruiser has ever gone. The Fury was both surprisingly popular and surprisingly fun to ride, o for 2010, onda introduced three new models based on the Fury platform—the engine, rame, rivetrain and so forth, ut less extreme in general and clearly focused on variations within the class.
Roughly speaking, onda sees the new siblings as aimed at 1) the motorcycling vacation group, ) overnight riders and 3) those who want to go for a ride, y hour, ay or whatever.
Starting with the top, he most expensive, ptioned and heaviest, s the Interstate. As mentioned, his is the 1312cc V-Twin, ith a 70.3-inch wheelbase. It comes standard with a full windscreen, eather-wrapped bags, loorboards for operator and occupant, ocker shift, at tires (17-inch front and 15-inch rear) wrapped in fully valanced fenders, ith a claimed curb weight of 712 pounds and an MSRP of $12,749, ollowed by a catalog of options too large to be detailed here.
Styling and design pull no punches. When Harley-Davidson unveiled the FXR line years ago, he old-line Harley guys objected to the frame rails being covered. Too Japanese, hey said. So here’s the VT1300, nd the designer admitted a touch sheepishly that Honda emphasized the frame members, ust as it moved the mass aft and put the key on a panel below the sculpted tank and put a V-shaped object between the engine’s Vee. The buying public may not know where the cruiser profile came from—Open-class TT bikes from the 1930s and ’40s, lad you asked—but they watch TV and know what hardcore motorcycles look like.
On the road, here are good reasons for the bags and boards and screen, ut on a short hop in good weather, his is one heavy machine. Suffice it that none of the journos on the photo shoot risked feet-up U-turns on a two-lane country road. And the average-size rider must look through the screen, ugs and all.
The Stateline is sort of a stripper Interstate, ith bags, issybar and smaller windscreen optional, ut it keeps the fat tires and full fenders. The Stateline is also lighter, laimed curb of 672 pounds and MSRP of $11,699, ith slightly higher options of ABS or SBS, onda’s linked-brake system.
More checks and balances here: Because the Stateline is lighter, t handles easier, lthough the fat front tire can slow down response. The riding posture is leaned back, o the small screen deflects some oncoming air while buffeting one’s head. Minus screen, t’s smoother and quieter, ut at 70-plus, anging onto the grips is tiring.
Risking the ire of both sides of this divide, he Sabre is the sportster (no initial cap) of the family. The Sabre has the 21-inch front tire and cropped fenders of the Fury, ut the steering-head rake is 33 degrees instead of 38 degrees and that makes the wheelbase 70 inches, gainst 71.5 for the kick-out Fury. In turn, hat makes the Sabre shorter and more agile. Claimed curb weight is 640 pounds, 79 with ABS. We’re not talking light, ut we are talking lighter.
Better still, he pullback bars are pulled back less and the forward-mount pegs and levers aren’t as far forward. Throw a leg over the Sabre, eave it off the stand and your heart picks up the pace. As the English hooligans chant: Here We Go
.* * * * TheTRANSACTION * * *
Our smal, ersonalized dealership specializes in moder, intage andcollectible motorcycles and repairabl, ightly damaged motorcycles.
Please note our 100 % feedback since 2006 !! so you can be assured of a smooth transaction .
EXPLAINATION OF THE " REBUILT " TITLE THAT IT WILL HAVE .

AS WITH MOST STATE, OU TAKE THE BIKE TO DMV INSPECTION STATION FOR A LIGHTING VERIFICATION .

YOU WILL NEED TO HAVE ALL YOUR LIGHTS AND SIGNALS WORKING .


THEN YOUR DMV WILL GIVE YOU A NEW TITLE IN YOUR NAME .


IT IS NOW STREET LEGAL AND WILL STATE "REBUILT " IN THE COMMENT SECTION


IF YOU RETAIN SOME PHOTOS WHEN YOU RECEIVE BIKE AND YOU CAN VERIFY ITS LIGHT DAMAGE

IN CASE THAT AT A LATER DATE YOU RESELL IT .


IT IS A SALVAGE TITLE CURRENTLY BUT WILL NOT BE NOR WILL IT SAY SALVAGE

ONCE YOU HAVE INSPECTION PERFORMED [ UNLESS YOU ARE IN CALIFORNIA ] .

IT IS BECAUSE OF THIS THAT I LISTED TITLE AS REBUILT IN DESCRIPTION !!!!

EVERY SINGLE BUYER OF A SALVAGE BIKE AND TITLE JUST LIKE THIS IN THE LAST 9 YEARS

HAS TRANSFERRED THRU D.M.V. SMOOTHLY AND WITHOUT FAULT . NO COMPLAINTS

AND WE HAVE HAD 100% FEEDBACK FOR THOSE 9 YEARS .
Payment by bank wire transfer or cash.
If out of state buye, ustomer is responsible for title and plates and taxes in their state .
Located in Las Vega,
BALLPARK / APPROXIMATE SHIPPING COSTS FROM LAS VEGAS DEPENDING ON SHIPPER AND FUEL COSTSTO L.A. $150TO SAN FRAN $250TO SEATTLE $350TO PENNSYLVANIA $500TO ORLANDO $500
we have professional shippers that we can recommend .
There are no fees or charges - only the purchase price !
Thank you for your interes, raig
702 327 7898 cell / anytime for questions or discussion

Also published at eBay.com