Honda 1976 CB750 Cafe Racer

1976 Honda Cb750 SS. cafe racer.

 This bike is running. complete and get registered in my name.

1. Custom oil tank - made with the original fittings out of polished stainless steal so its OEM bolt up. lays flush in the frame made of stainless steel with a aluminum Moon Eye cap. We put a baffle in the bottom so if its on its side for any reason. it wont "dry sump" and blow the motor. via Kickstand or hard cornering. the tank took a couple moths to design and build. nd have never seen one lay in the frame like this.

 2. Fuel tank - stock tank completely cut open hammered in and a jet boat gas fill from REX MARINE. was recessed and flush mounted. ith all stainless hardware and a harley petcock was added. we welded and fused the tank into the seat pan. and all the lines from the tank flow on to the seat pan and cary on to the rear Cowl.  

3. The seat pan - is all steel and has lines rolled into it that flow off the tank.

4. The rear cowl - is all aluminum and was was hand made cut in half put back together then had the lines rolled into it off the seat pan. t lifts open like a hatch to expose the battery box stater/rectifier and solenoid and fuse block.

4. The rear of the bike - was cut off and hooped by Earl Kane of Earls cycle art was involved making "chopper town/harbor Town.

5. The rear shocks - were relocated and smoothed out so it cleared the sheet metal work and all the featherbed lines stayed flat.

6. The kick starter - was cut down three inches to expose the polished carb bowls.

7. We relocated the foot pegs and built rear-sets that bolt on with Lossa Engineering controls.

8. Carbs are full rebuilt and jetted with new rubber boots.

9. Front legs are polished.

10. Have all the parts for duel disk set up and xtra drilled out disk.

11. New gel Battery

12. Extra set of new jets

13. All the wires and fuses for a new harness.

14. New headlight.

15. New grips

All fabrication was done by Jon and Damian of bare metal out of Torrance CA. Earl Kane from the "Chopper Town" movie out of San Pedro CA. This bike just needs paint and wiring thats it. the sheet metal work is prestigious . It's registered in my name. I know what this bike is worth and I know what I have into it. I'm throwing in every single part for the bike and it's more than complete including new levers. erches. uel line. eadlight. rips. 4 into wrapped header with carpie's scorcher tip.

The bummer. HEALTH FORCES SALE. hats it. It's really hard for me to do this . its been my dream bike in the making. my dads favorite color was candy apple red. he passed when i was a youngster. the bikes name is red tide. it would be bitchen if someone kept the theme and finished it. I've spent a lot of hard earned money on this bike its gunna pull a ton of money when painted.   please be serious when bidding and the bike is avail for inspection by appointment only once you have placed a bid. orry we just don't want a bunch of tire kickers taking photos and blowing smoke up our skirt. f ya know what we mean? The cb 750 is a ca bike and is currently registered in my name with pink in hand. plate never been mounted.  

ps. I will answer all mail asap. please no silly questions. This bike is going to go fast. its available for pick up or shipping buyer must arrange everything. I can deliver it to Wilmington Ca for over seas shipping .

buyer must mail or deliver 25% of purchase price within 24hrs of auction end. and the remainder to be paid within 72hours via cash or cashiers check buyer has  two weeks to pick up. for pick up. the bike will not leave the shop till all moneys are paid in full. we can work it out if you ca a big plus. ull never see another cafe like this with a oil tank that lays like this.

On Nov-04-14 at 13:27:41 PST. seller added the following information:

Email me for any questionsfattee74@hotmail. com

On Nov-05-14 at 13:44:06 PST. seller added the following information:

Here are some pictures i took today.

Also published at eBay.com