1976 KAWASAKI KT250 KT 250 SURVIVOR IN ORIGINAL CONDITION-VERY RARE FIND!!!!

Very rare to find these bikes in original condition after 40 years. If you are thinking of restoring a KT250 this is the bike you want to start with due to its having all of the parts that are usually removed for dirt use such as lights. fenders. oil tank & pump. horn. speedometer. key switch w/key. side covers etc. Don't let the faded paint fool you. this bike is in original condition. The tank is dent free only having one tiny ding that is very difficult to find. This is only one of three KT's I have ever owned with the original handlebars since they have usually been bent and replaced. This bike is in AS FOUND condition and has not been cleaned. repaired or altered in any way prior to sale. Bike was started and ridden but has not been molested or doctored or messed with at all. Sold with BOS. Here is a list of the most important original parts on this bike:TIRES-ORIGINAL DUNLOP TRIALS UNIVERSALD. I. D RIMS W/STICKERF & R FENDERS & MOUNTSFRONT MUD FLAPKEY SWITCH W/KEYHEADLIGHT & MOUNTHANDLEBARDIAMOND PATTERN GRIPS-USED ONLY ON KT250 MODELS-VERY RAREPERCHES & RUBBER BOOTSCONTROLS/COMBO SWITCHES ON RIGHT & LEFT SIDESSEATTANKSIDE COVERS-THEY ARE FROM AN A1 MODEL BUT THE PAINT AND DECALS ARE THE ONLY DIFFERENCESHORNSPEEDOMETER-WORKSTAIL LIGHTSOME OF THE ORIGINAL INSULATORS BETWEEN THE ENGINE FINS-I HAVE ONLY HAD ONE OTHER BIKE WITH ANY INSULATORS LEFTTo replace these original parts buying them one at a time would cost $3000-4000 plus the cost of a bike to start with. This bike starts right up and runs well. Tires will need to be replaced as there are some sidewall cracks. the rear muffler mount needs to be replaced. Both levers are bent but they are the original levers. The petcock was replaced with a new OEM Kawasaki part. they are exactly the same as the original petcock. Clutch is stiff but works fine. I will include another complete clutch if requested. With paint and decals the bike would look much better and then do some work polishing the aluminum etc. FEEL FREE TO MAKE A REASONABLE OFFER. call. email or teXt. Dan 801-669-3900I AM HAPPY TO ARRANGE SHIPPING ANYWHERE. I WORK WITH SEVERAL BROKERS AND GET VERY REASONABLE RATES.

Also published at eBay.com