1979 KZ1000 Custom Chopper/Bar Hopper in good running condition.

Description

I am selling my one of a kind 1979 Kawasaki KZ1000 hard-tailed bar hopper.This bike has been extremely good to me. It is very reliable and very fast for a 36 year old motorcycle. It has approximately 24000 miles on the engine. The new speedometer shows 105 miles (might go up a few). The last oil change was done at the 8 mile mark. It doesn't have any fluid leaks at all.This bike has a clear Florida title in my name.It was my daily rider for almost five years but I bought a new bike and instead of neglecting it I figured I would give someone else a chance to appreciate it.Most of the custom work has been done in the last two years and there are a lot of new parts on this bike.Below is a list of everything (that I can remember) that I have changed on this bike most of the parts are recently installed.

• Voodoo Vintage Boardtrack Hard tail conversion
• Front frame section has been modified and gusseted for strength
• Custom Chrome 4.2 gallon stretched tank (Red kote sealed)
• Aircraft style vented gas cap
• Pingel high flow fuel petcock
• Custom rear fender
• Custom electronics box
• Custom battery box
• Low Brow Customs kickstand
• AGM battery with charger pigtails attached and trickle charger included
• Biltwell Black Smooth Slimline seat
• La Rosa coil seat shocks
• Voodoo Vintage stainless steel Snail Cam chain adjusters
• Monster Craftsman sprocket chain tensioner
• Shaved upper fork clamp
• Ulitma 18x5.5 60 spoke rear wheel w/200/50-18 tire
• Kawasaki 19" front wheel w/100/90-19 tire
• 2002 Harley Softail rear caliper w/new carbon Kevlar pads
• Kawasaki ZX10 rear master cylinder
• Harley rear caliper and rotor
• Rebuilt KZ1000 front forks
• KZ1000 dual front calipers with carbon Kevlar pads
• Sport style front master cylinder
• Front and rear braided brake lines
• All Balls steering stem bearings
• 530 chain conversion
• EK MVXZ gold chain
• Offset front sprocket
• Modified sprocket cover (to accept the offset front sprocket)
• Custom made rear sprocket
• Tarozzi Type 13 folding rearsets
• Tarozzi fork brace
• Woodcraft 3 piece clip-on handlebars
• 1.9" mini speedometer with odometer
• 5-3/4" visor headlight with H4 composite bulb.
• Momentary micro-switch controlled LED turn signals
• LED neutral and high beam indicators
• Axle mounted tag bracket with LED tail/brake light
• Rebuilt Mikuni BS34 carburetors jetted (40 pilots 132.5 mains)with new JBM Industries diaphrams
• Steel Dragon polished billet velocity stacks with brass mesh filter screens
• Motion Pro throttle clutch and speedometer cables
• Emission reed valve block of plates
• Stainless steel engine hardware
• Wrapped Vance and Hines header with open slash cut chrome tip
• Polished exhaust flanges
• Marshall liquid filled analog oil pressure gauge
• Dynatek ignition and mini coils
• Crane Cams 8.5mm FireWire performance plug wires
• NGK B8ES spark plugs
• 118 DB horn
• Polished oil cap
• Waterproof registration holder
• Fresh oil change with K&N oil filter (approx 100 miles ago)

Feel free to contact me with any questions you might have.I encourage any interested person to contact me to set up a day/time if you want to see it in person.Due to liability issues no test rides will be allowed.The winner will be required to make a $500.00 deposit via PayPal within 24 hours of the end of the auction. The difference must be paid in cash or certified cashier's check within 7 days of the end of the auction.Pick up/shipping will be the responsibility of the buyer. I am glad to aid in assisting the buyer or shipping company to load the bike. I am able to store the bike in my garage for up to 30 days if needed.

Also published at eBay.com