1974 Kawasaki H1 Triple Mach 3 III 2 Stroke

1974 kawasaki h1 500 mach 3 tripleI took it down to bare frame and as it was reassembled all faulty/broken parts were replaced. Runs great and is ready to ride. All switches and electrical parts tested and working correctly.All parts replaced are:new tiresfork seals and dust boots new fork oilinner fork tubes were replaced with new, ork springs and valves came from a 73 h1 500handle bars were replaced with a set of drag bars with new grips and leversfork stem bearings replaced with sealed roller bearingsnew seat covercarburators were rebuilt with new carb covers and start plunger capsnew air filterstop end of engine was rebuilt pistons are nos rings are new aftermarket partscompression is even and in spec where it should beall new engine gaskets and sealsnew clutch plates and clutch cableengine cover hard wear all replacedchain sprocket at engine replaced new o-ring drive chainrear foot peg rubber replacednew tachometer cablenew oil level sight glassshifter,kick starter,rear brake contolrs rubber replacednew fuel petcock valve and fuel tank mountsnew headlight with integrated front turn signals,new headlight mount
new paint
emblems clear coated
frame was clear coated
new mirrorshad new key made all locks workinghas original spare spark plug holder but hold down strap is missing
seat pan isoriginal has had repairs donetrip reset on the odometer knob is missing
all nuts and bolts were not replaced were removed cleaned and inspectedfront fender is currently not installed but can be included at request

Also published at eBay.com