1977 Suzuki RM 125- RH Factory Replica

1977 Suzuki Rm125 this is a complete from the ground up race build this started with a very low hour machine. Its a tribute the factory Suzuki RH race bikes and draws attention wherever its seen.It has 38mm Showa forks rebuilt with new seals seal savers and race-tech springs the trees are later model all alloy with the swept back bar mounts for more rider comfort. The wheels have been built with Buchanans heavy guage stainless spokes and nipples the rims are polishd and are flawless the hubs have new bearings seals and brake shoes. It has new opaque plastics new seat foam and cover. All cables are new NOS suzuki new grips new renthal vintage bend bars. The tank is painted with Sikkens base coat clear coat and is flawless. The rear has new 15.75" progressive shocks a period aluminum swingarm with new chain guide rollers and new bearings it has a new chain and sprockets and a aluminum rear brake torque arm. It has nice pegs with new springs nice tight kicker and oem shifter. All fasteners are new stainless with lock nuts. Tire are new with just a few miles that were put on the bike for breakin.The engine has had a complete rebuild it has all new bearings seals and gaskets new clutch discs new boysen 2 stage power reeds and new rod kit. The cylinder is on standard bore it has a new Suzuki piston rings and bearing. The pipe and silencer was custom built on the bike by Jon Easton of JEMCO fame. The carb is a Mikuni and is jetted for this pipe and the new UNI filter at sea level. It has Tygon fuel line and vent hoses. the cylinder and head have been bead blasted for effecient heat transfer and to give it that works look.This bike runs and handles great ( Very nimble and light ) shifts smoothly and is very tight these bikes are very competive on the vintage racing circuit. The engine has been run thru 3 easy heat cycles. Thousands have gone into this build. Priced very fairly.Buyer responsible for shipping

Also published at eBay.com