1984 Yamaha RZ350 Kenny Roberts w/ FZR suspension; RZ TZ RGV 2 stroke NO RESERVE

Description

Great bike that needs nothing, ’m selling to fund my Aprilia RS250 project. Specs below

Motor:

200 miles on fresh top end and crank rebuild. Crank was trued and welded, iseco pistons on 2nd oversize bore. Oem head gasket. Zeeltronic CDI (non- programmable). Genuine Keihin PWK 28 flat slide carbs, ni pod filters and quick turn throttle with custom cable. Banshee adjustable ignition timing plate (currently running +3 degrees from stock). Allspeed expansion chambers that were repacked and powder coated black (sound great, ot too loud). Oversized aluminum radiator. The carbs are jetted properly (if not a little rich) and the bike runs great. Starts on the 2nd kick cold, dles nice, ulls hard and is extremely smooth. Setup for 40:1 premix and premium pump gas.

Chassis:

Aluminum FZ600 swingarm (professionally machined to fit in the RZ frame). Fox shock with ride height adjustment. FZR wheels (new bearings, owder coated black). The sprocket carrier was machined for proper chain alignment with the wider rear tire. FZR forks (fresh rebuild),triple trees and clip-ons, apered head bearings. FZR brakes front and rear, tainless rear line. New chain and sprockets, hain is a gold o-ring 520. New tires. The bike handles and stops very well.

Body:

All of the paint was redone with redproduction decals and professional clear coat. Reproduction solo cowl with bump pad. Inside of gas tank is rust free, t was professionally coated by a radiator shop. Manual style petcock. Oem seat with no rips or tears. Custom laser cut stainless bracket to mount the oem fairing and gauges to the fzr triple clamps (looks factory). The frame has original paint and has a few minor scratches andnicks but overall is very presentable. I left off the horns and turn signals for a clean look but the wiring is still there if you want to add them. The rear fender was also eliminated and tail light tucked up a little higher. Included are the stock rear fender and tail light bracket.

Full disclosure: The motor numbers and frame numbers do not match. The original engine cases had damage to one of the crank bearing journals and it was decided to use a different set of cases. Clean title in hand which matches the numbers on the frame. The damaged cases with matching numbers will be included. The odometer shows 2200 miles but I have no idea if that mileage is accurate or if they are even the original gauges. It doesn’t really matter since everything on the bike from the ground up is essentially new or rebuilt. As I mentioned the title is in hand, ut I never transferred it to my name. The buyer portion is still blank so it shouldn’t be a problem.

Check my feedback and bid with confidence, have sold 5 bikes on ebay all to happy buyers!

Also published at eBay.com