1975 Harley-Davidson FLH 1200 w/ Sidecar

1975 Harley-Davidson Other

Price: US $14,000.00
Item location: Alexandria, Virginia, United States
Make: Harley-Davidson
Model: Other
Type: Touring
Year: 1975
Mileage: 8,658
VIN: 2A37290H5
Color: Teal
Engine size: 1,200
Vehicle Title: Clear
Contact seller: Contact form
Description

In 1993 the following work was done by Nicholas Motormobilia in Huntsville, L:
Enginedisassembledand fitted with new piston rings using original pistons and cylinder. The heads were sent toholt machine where they were given a complete rework. The rocker boxes and most engine bolts were chromed. The engine cam bearing was replaced and the cam and ignition system was installed (new ignition system) then misc chrome covers installed on engine cam side.
The transmission was disassembled and inspected. All new transmission seals and rear transmission drive sprocket installed. The transmission was fitted with a new kick starter kit.
The clutch primary housing wasdisassembledand rebuilt with new clutch hub, ew clutch friction plates, ndnew throwout bearing, earing washers, nd clutch push rods.
All motorcycle wiring was replaced with a new main wiring harness. The starter relay, olenoid, nd switched replaced. The lights and turn signals replaced and rewired.
The wheels are HD cast aluminum, ires and HDS classic white walls. calipers, rake pads, rake rotors, rake lines, nd master cylinders were replaced. The rear sprocket and drive chain were replaced. The transmission drive sprocket was changed from 51 tooth to 48 tooth to be less wear and tear on the motorcycle.
The color is turquoise and cream two tone. The seat is 40's/50's style leather buddy with wrap around rear bar. The exhaust system is a new 2 into 1 system with a 60's style fishtail muffler.
The restoration in 1993 cost $7,500.
Sidecar custom built by C Stanley Motorsports in 2011, ptions include:
Body is handmade a 1/8" aluminum welded
powerdercoating of body inside and out
rear trunk
grab bar for passenger
rear trunk rack
windshield
deluxe tonneau cover
map pocket
lap belt
manually adjustable tilt control
car tire on sidecar
The custom sidecar built in 2011 cost $8,379.
Meticulously maintained but owner hasn't been able to ride for past 2 years. Bike has been sitting covered in the garage since then. Attempted to start the bike but battery didn't have enough juice.

Also published at eBay.com