72 Honda CB750 Cafe Racer, Brat/Tracker, $20,000 Documented Professional Build

Description

1972 Honda CB750 Brat Tracker
$20,000 Documented Build, uns and Rides Extremely Well, ess than 900 Miles on Restoration

This CB750 was designed by a photographer and sculptor based out of Chicago and NY and hand built over the course of 18 months by vintage four-cylinder Honda expert Dinosaur Four. The bike was stripped down to the frame and built from the ground up with many custom fabricated details, ountless documented hours and thousands of dollars in parts.
The bike runs beautifully, tarts easily and has tons of power. Carbs are nicely synced and it runs like a top. It was finished at the end of 2013 and has been ridden sparingly since then. It has less than 900 miles on it since the rebuild was completed. It's either been in storage at motorcycle garages on a battery tender, r during the season, n a climate controlled garage when not being used. It's just had a full tune-up and detailing.
Below is a list of some of the parts and restoration work. The bike was purchased for $2,000, nd there is at least $10,000 in labor and another $8,000 in newly-purchased parts on this bike, ccording to the builder. Receipts for restoration come with bike.
The frame was stripped and powdercoated
New tapered neck bearings
New wheel bearings
New wiring harness and completely overhauled switchgear
Custom copper oil piping and custom fabricated aluminum 2.5 liter oil tank.
Stainless steel fenders (front - RocCity Aluminum hand-made), he back fender is custom fabricated
Custom seat pan and upholstery
Custom passenger pegs
Beautiful original SuperSport tank. Tank was re-coated, xterior was stripped and clear coated.
New spark plugs
Custom 4-1 exhaust
Rebuilt forks
New shoes, ew brake levers, rakes adjusted
Intake manifold rubbers, ngine gasket set, ngine oil seal kit, ew engine covers, ebuild carbs, tc
New lithium ion battery with an automatic cut off
New Dyna electronic ignition and coils
Rims were stripped and painted, aced with new spokes and fitted with new wheel bearings
35mm Tarozzi clip ons with brown grips and billet aluminum top triple tree
2.5" speedometer and tachometer on the triple tree
All new lighting - turn signals, aillight, eadlight (and custom headlight brackets)
New regulator / rectifier
Fully indexable rearsets
Custom license plate holder
K&N pod filters
Firestone Deluxe Champion tires with new tubes
Here is a more complete itemized repair order and parts list:
Remove and replace front and rear tires, imstrups, ubes, nd balance (2)
Remove and replace seals (4) and bearings (4) for front and rear tires (2)
Teardown and relace front and rear rims, rue, lean bearing races (2)
Beadblast aluminum wheel hardware, ubs, procket carrier, rake hub, ootpeg mounts
Clean and paint front and rear spokes
Remove and replace drive chain and sprockets, ubricate and adjust
Remove and replace forkseals and fork oil, efinish tubes and lowers (set)
Remove old ball bearing races, nstall new tapered bearing races and bearings
Assemble front end, eadlight, ork ears, riple tree, andgrips, ables, auges
Rebuild front brake system, andblast and paint caliper and rotor, leed system
Design rears mounts, ount, esign and fabricate rears shift and brake levers, djust
Design seatpan mounts and frame mounts, nstall seat, eld seatpan mount
Strip frame and prep for powder coating, eliver and pickup from city
Design and craft rear fender, eld rear fender mounts, esign and mount taillight
Design and craft oil tank mounts, abricate, eld on
Cutoff and grind flush extra frame tabs
Design and fabricate custom 2.5 liter aluminum oil tank
Design and craft and weld on rubber mounted turn-signal mounts
Design and craft battery box, abricate mounts for solenoid, VD, eg-rec, usebox, aint
Overhaul front handlebar switch assemblies, tart, orn, urn, i/lo, ill, andblast
clean and adjust/rejet carbs, un, nstall manifold clamps, ew fuel line and filters
Install oil tank, opper handcrafted oil lines, vents, eed, rain
Redesign and reroute electrical system, ide under seat, harge system, dd LVD, usebox
Install electronic ignition and ignition coils, ires, lugs, ime engine
Wire up gauge lights, il, eutral, i/lo, urn, orn, nstall turn signals, ront and rear
remove engine, efinish engine case and cylinder block and cylinder head, nstall engine
Refinish engine covers, alve cover, lutch cover, hain, hifter, enerator, il an, il filter cap
Refinish exhaust system, and down, ire brush, egrease
Remove and replace cam, am chain adjuster, am holders, ifters, ime valves
Repair threaded holes, on cylinder head, on engine oil line inlet
Rebuild petcock, rill, ap and install new seal and screws, nstall gas tank flap and lock
Install exhaust system
Install license plate mount and plate
Bead blast engine mounting bolts and nuts, learcoat/paint
Parts list
Welding, ear frame rail, ears mounts, auly’s zap-it shop
Raw steel stock, eat mount, rommets, ivets, ubber bump
Rearset mounts, olts, ashers, ocknuts
Raw material for oil tank, inch diameter aluminum pipe, ube stock
Rear passenger footpeg mounts and harward
Taperered needle neck bearings
Raw steel stock, attery and electrical mounts
Raw steel stock, ender mounts/struts
New raw steel 6 inch flat half fender
Front brake system, aster cylinder, aliper, ounts and hardware
Rear axle bushing spacer for sprocket hub carrier
New fuse box, lade style, circuit and 4 fuses
Used valve cover, int condition and tappet covers
Finned clutch adjust cover
Stainless steel screws
Copper tubing and brass compression fittings
Oil pan cover
Generator cover
Custom ignition switch mount
75 electrical connectors, eat shrink tubing, older, ire
New stainless steel exhaust studs
Engine electrical harness, il light, eutral light, enerator wires
Horn
Custom front fender mount
4 qt. oil, il filter
Front brake pads
Right side switch cluster assembly
New fuel line and inline fuel filter
new carb jets, 126.5 main jets
New, lightly shorter than stock clutch cable
New stainless steel intake manifold clamps
This is a great cafe racer CB750 that is ready to be ridden and enjoyed. Please see cold start video below along with all photos in description. Call with any questions. Bike can be seen in my vintage car/motorcycle showroom in North Williamsburg, rooklyn. We are a Honda specialist and current national 1st and 2nd points leader in AHRMA Sportsman 350 and 500 vintage racing on a heavily modified 72 Honda CB350.
Bike has a clean and clear NY transferrable registration that will be transferred to you properly through my licensed and registered NY state dealership.
We can assist with worldwide and national shipping. We ship many vehicles across the country and overseas every month and can get discounted dealer rates. $600 to los angeles. Enclosed motorcycle hauler.

Please call Angus at 631-318-0155 with any questions and for more information.

We specialize in postwar sports cars, intage European and British motorcycles, nd other collector vehicles. Northeast Sportscar.

NOTES, ERMS AND CONDITIONS:

A $1,000 deposit is due within 24 hours of auction close.

The balance of the funds are due within 72 hours of auction close.

There are no warranties expressed or implied of any kind.

Buyer is responsible for shipping.

I have described the above vehicle to the best or my ability. However I may have missed something, verlooked something, r not been aware of something due to lack of knowledge.

Terms and Conditions of Sale

I take time to carefully describe the vehicle and include a substantial number of photos. However, t is very important to keep in mind that this vehicle is pre-owned, ot brand new. After careful reading of the entire description, ather than making a potentially incorrect assumption, f any statement or comment is unclear, r if you have questions, lease e-mail or call me prior to bidding.

At Close of Auction

The successful "winning" bidder must telephone me within 24 hours after the auction has ended to verify purchase and make arrangements to complete the transaction.

A $1,000 deposit is due within 24 hours of auction close by cash, ashiers check, r wire transfer.

Full payment must be received within 72 hours after the end of the auction. Payment must be certified funds, ash, ank check or wire transfer. If funds are not received, nd an alternate arrangement has not been made, the vehicle can and will be made available to other potential buyers on a first-come, irst-serve basis.

Shipping

I will assist with shipping arrangements however; the buyer pays all shipping costs. I do not have any affiliation with, r interest in, ny transportation companies and all questions or concerns should be addressed directly with them.

Disclaimer

The vehicle is sold with no warranties expressed or implied. As with any used vehicle, igns of wear may become more obvious under close inspection, uch small chips or nicks, ight scratches or minor abrasions, nd other indications of normal wear and tear. I will not and cannot be held liable or responsible for these issues. Buyer assumes all risk in operating the vehicle.

Bidders are entering into a legal and binding contract to purchase the vehicle described above.

Non-paying bidders, nqualified bidding, id shielding, uction interference or any type of harassment, ill be dealt with according to eBay Rules, local law, nd may include, ut are not limited to, egal action and applicable fees, oss of deposit or any other necessary costs. Sales are final. Buyer accepts all risk in operating the vehicle. We are not responsible for any damage to the vehicle after it has been paid for and before leaving our facility.

I reserve the right to cancel bids and/or our auction at any time for any reason.

Placing A Bid On This Auction Constitutes Acceptance Of These Terms And Conditions And Acknowledgement That You Have Read And Understand All The Information Presented.

Also published at eBay.com