Kawasaki KZ1000 Pro Street Style Chopper. Runs Great!

Description

I am selling my one of a kind 1979 Kawasaki KZ1000 Pro Street style chopper.This bike has been extremely good to me and was my daily rider for several years. It is very reliable and very fast. It has approximately 24000 miles on the engine. The previous owner told me that he had a Wisco 1075 big bore kit installed when the bike had about 10k miles on it but I never opened the motor to confirm.The new speedometer shows 106 miles (might go up a few). The last oil change was done at the 8 mile mark.This bike has a clear Florida title in my name.It was my daily rider for almost five years but I bought a new bike and instead of neglecting it I figured I would give someone else a chance to appreciate it.Most of the custom work has been done in the last two years and there are a lot of new parts on this bike.Below is a list of everything (that I can remember) that I have changed on this bike. Most of the parts were new at the time of installation.

• Voodoo Vintage Boardtrack Hard tail conversion
• Front frame section has been modified and gusseted for strength
• Custom Chrome 4.2 gallon stretched tank (Red kote sealed)
• Aircraft style vented gas cap
• Pingel high flow fuel petcock
• Custom rear fender
• Custom electronics box
• Custom battery box
• Low Brow Customs kickstand
• New AGM battery (installed 06/08/15) with charger pigtails attached and trickle charger included
• Biltwell Black Smooth Slimline seat
• La Rosa coil seat shocks
• Voodoo Vintage stainless steel Snail Cam chain adjusters
• Monster Craftsman sprocket chain tensioner
• Shaved upper fork clamp
• Ulitma 18x5.5 60 spoke rear wheel w/200/50-18 tire
• Kawasaki 19" front wheel w/100/90-19 tire
• 2002 Harley Softail rear caliper w/new carbon Kevlar pads
• Kawasaki ZX10 rear master cylinder
• Harley rear caliper and rotor
• Rebuilt KZ1000 front forks
• KZ1000 dual front calipers with carbon Kevlar pads
• Sport style front master cylinder
• Front and rear braided brake lines
• All Balls steering stem bearings
• 530 chain conversion
• EK MVXZ gold chain
• Offset front sprocket
• Modified sprocket cover (to accept the offset front sprocket)
• Custom made rear sprocket
• Tarozzi Type 13 folding rearsets
• Tarozzi fork brace
• Woodcraft 3 piece clip-on handlebars
• 1.9" mini speedometer with odometer
• 5-3/4" visor headlight with H4 composite bulb.
• Momentary micro-switch controlled LED turn signals
• LED neutral and high beam indicators
• Axle mounted tag bracket with LED tail/brake light
• Rebuilt Mikuni BS34 carburetors jetted (40 pilots 132.5 mains)with new JBM Industries diaphrams
• Steel Dragon polished billet velocity stacks with brass mesh filter screens
• Motion Pro throttle clutch and speedometer cables
• Emission reed valve block of plates
• Stainless steel engine hardware
• Wrapped Vance and Hines header with open slash cut chrome tip
• Polished exhaust flanges
• Marshall liquid filled analog oil pressure gauge
• Dynatek ignition and mini coils
• Crane Cams 8.5mm FireWire performance plug wires
• NGK B8ES spark plugs
• 118 DB horn
• Polished oil cap
• Waterproof registration holder
• Fresh oil change with K&N oil filter (approx 100 miles ago)

Click here;Custom KZ1000 to see a short video. Feel free to contact me with any questions you might have.I encourage any interested person to contact me to set up a day/time if you want to see it in person.Due to liability issues no test rides will be allowed.The winner will be required to make a $500.00 deposit via PayPal within 24 hours and the difference must be paid in cash or certified cashier's check within 7 days.Pick up/shipping will be the responsibility of the buyer. I am glad to aid in assisting the buyer or shipping company to load the bike. I am able to store the bike in my garage for up to 30 days if needed.Thank you for your interest.

Also published at eBay.com