RD350 YPVS F2 Project

 RD350 F2 Project Il give you a basic run down. This is a Project!! It is in bits and what is on the bike is loosely fitted! It needs time and money to get it where it should be! The first picture is to shown what it looked like built up only. Not a bad reg plate either. G520 RDV quite fitting for a RD/RGV hybrid!F2 Frame. All numbers present and correct matching the V5! Needs to be painted350 YPVS engine all numbers present and matching. Has had a good crank fitted. brand new pistons. new gaskets and seals. It does run but the carbs need sorting out. Carbs are there but need stripping and rebuilding. standard F2 exhausts not mint but useable (was going to get a set of tsa pipes made)There is and RGV250 VJ22 swingarm with lower linkage. ive had the bushes made to fit the swingarm on the standard RD pivot bolt also the swingarm has had new bearings. There is a zxr400 adjustable rear shock fitted also. this needs dogbones made to desired ride height. There is a pair of 2006-2011 aprilia rs125 wheels. There is no forks! I was going to fit rgv250 front forks. but havent had any luck getting a set yet. although ive bid on plenty!!New roller taper head bearings included but not fitted. There is loads of odds and sods with the bike. It does need spacers and bearings made ect needs parts buying but at least you can make it your own!I have some standard bits. standard swingarm. standard wheels. standard yokesIm not going to give it away. it is a project or good load of spares! But if i dont get what i want i will either strip it and sell the parts. i would probably get more this way! or keep slowly building it as time and money permitsany questions please feel free to ask!  Collection only

Also published at eBay.com